NTN K68×75×21 needle roller bearings

T max.:200 °C; d:25.4 mm; J:50 mm; N:M10; s1:13.5 mm; Weight:0.56 kg; L1:25 mm; Z:17.5 mm; C:14 kN; G:M6x1;

A1:34 mm; L:200 mm; N:18mm; G:R1/8"; C0:23.2 kN; A:54 mm; T max.:100 °C; N1:23 mm; Weight:2.6 kg; H:57.2 mm;

T min.:-20 °C; B:34.1 mm; d:25 mm; Weight:0.19 kg; T max.:100 °C; C:11.9 kN; Recommended tightening torque for set screw:3.9 Nm; s1:17.05 mm; C0:6.3 kN; Designation of bearing:MUC205FD;

T min.:-20 °C; C0:32.8 kN; d:60 mm; Recommended tightening torque for set screw:22 Nm; A1:50.8 mm; H:68.3 mm; J:193.7 mm; Weight:5.23 kg; Z:35.6 mm; G:M6x1;

D6:50.4 mm; f0:15.6; Preload level:GN; Nlim (grease):18,800 rpm; D1:58.3 mm; a:20.2 mm; d2:47.7 mm; Mass:0.19 kg; D2:62.5 mm; Contact angle α:25 °;

r1a max:0.6 mm; Brand:SNR; a:23 mm; f0:8.44; Axial displacement K Factor:0.62; Characteristic cage frequency, FTF:0.46 Hz; Mass:0.26 kg; Characteristic inner ring frequency, BPFI:13.63 Hz; Fatigue limit load, Cu:0.46 kN; Characteristic outer ring frequency, BPF0:11.37 Hz;

C0:6.65 kN; J:94.5 mm; H2:63.7 mm; T min.:-20 °C; N:11mm; G:M6x1; Designation of housing:PLE204N-; N1:17 mm; C:12.8 kN; Designation of bearing:EX201G2L3;

Da max:177 mm; Static load, C0:107 kN; ra max:2.5 mm; Characteristic cage frequency, FTF:0.39 Hz; Fatigue limit load, Cu:4.1 kN; D1:167.7 mm; Mass:5.02 kg; Radial clearance class:C3; Characteristic rolling element frequency, BSF:4.18 Hz; f0:13.3;

Fatigue limit load, Cu:0.21 kN; d:17 mm; ra max:0.6 mm; Mass:0.07 kg; f0:12.8; Dynamic load, C:9.6 kN; Radial clearance class:C5; Characteristic rolling element frequency, BSF:3.78 Hz; Min operating temperature, Tmin:-60 °C; D:40 mm;

H:122.2 mm; C0:15.2 kN; s1:30.2 mm; S:9.5 mm; d:35 mm; T min.:-20 °C; J:100 mm; A1:5 mm; A:10 mm; Recommended tightening torque for set screw:11.5 Nm;

Inventory:0.0; Product Group:B00308; Noun:Bearing; Inch - Metric:Metric; Da max:139 mm; Harmonized Tariff Code:8482.10.50.68; Dynamic load, C:104 kN; Keyword String:Ball; Max operating temperature, Tmax:170 °C;

d1:44.1 mm; Weight:1.2 kg; d:30.16 mm; A1:12 mm; B1:48.3 mm; L:108 mm; C0:11.2 kN; T min.:-20 °C; G:R1/8"; A2:50.1 mm;

E:18 mm; Designation of housing:PG205N-; Recommended tightening torque for set screw:3.7 Nm; H2:70 mm; T min.:-40 °C; C:14 kN; H1:15 mm; Z:17.5 mm; L:75 mm; A1:25 mm;

Bearing Outer Ring Material:Steel; Retainer Material:Nylon; Housing Coating:Powder Coat; Ball Bearing Housing Series:212 Series; Anti-Rotation Pin:Yes; Shaft Attachment (2):Set Screw; Bearing Insert Material:Steel; Bearing Family:Setscrew Ball Bearin; Ball Grade:Class 10; End Cap Groove:No;

T max.:200 °C; A1:33 mm; H2:106 mm; B:41.2 mm; s1:20.6 mm; Recommended tightening torque for set screw:11.5 Nm; H1:20 mm; d:45 mm; Designation of housing:PG209N-; T min.:-20 °C;