KOYO 52218 thrust ball bearings

Designation of housing:PE210N-; H:57.2 mm; N1:23 mm; H1:21.5 mm; G:R1/8"; T min.:-20 °C; N:18mm; L:200 mm; Z:24.5 mm; L1:61 mm;

Characteristic cage frequency, FTF:0.43 Hz; Max operating temperature, Tmax:120 °C; Nlim (oil):8,100 rpm; Nlim (grease):6,100 rpm; Brand:NTN; Y0:0.6; Fatigue limit load, Cu:7.9 kN; Characteristic outer ring frequency, BPF0:7.76 Hz; Characteristic rolling element frequency, BSF:6.67 Hz; Static load,

Max operating temperature, Tmax:110 °C; Outside Diameter:1.102 Inch | 28 Mill; Weight / Kilogram:0.02; Characteristic rolling element frequency, BSF:4.07 Hz; Outer Race Width:0.315 Inch | 8 Milli; Bore:0.472 Inch | 12 Mill; Inventory:0.0; Characteristic cage frequency, FTF:0.38 Hz; da min:14 mm; Enc

Grease Type:Unirex N2; Bearing Outer Ring Material:Steel; Flinger Type:Rubberized; Seal Type:Single Lip; Housing Material:Ductile Iron; Bearing Thread Size:1-1/4 - 11-1/2; End Cap Groove:No; Max Bearing Speed:3500 rpm; Ring Size:Standard; Bearing Inner Ring Material:Steel;

E:12.5 mm; Weight:0.84 kg; H:42.9 mm; Designation of bearing:US206-20G2T20; s1:15 mm; A:38 mm; G:R1/8"; Designation of housing:PAE206N-; L1:22 mm; d:31.75 mm;

A1:14 mm; d:22.22 mm; L1:72 mm; J:117 mm; T max.:100 °C; Designation of housing:FA206-; G:M6x1; d1:45 mm; A:31 mm; s1:20.5 mm;

G:R1/8"; d:20 mm; Designation of bearing:US204G2T04; C0:6.65 kN; B:25 mm; L:86 mm; N:11,5mm; A:29.5 mm; C:12.8 kN; s1:12.5 mm;

SW:3.97 mm; L1:76 mm; s1:36.3 mm; d1:51.1 mm; T max.:100 °C; L:122 mm; T min.:-40 °C; C:25.7 kN; L3:40 mm; E:24 mm;

S:7.5 mm; e:19 mm; G:R1/8"; J:99 mm; A:32.5 mm; H3:60; B1:30.9 mm; B:21.4 mm; Designation of housing:FLZ205-; d1:37.4 mm;

J:95 mm; G:M6x1; N1:19 mm; N:13mm; H2:65 mm; S:17 mm; B:34 mm; s1:30.5 mm; B1:43.5 mm; d1:32.4 mm;

Da max:36 mm; Ca max:3.18 mm; Db min:45.5 mm; Radial clearance class:CN; Brand:NTN; f0:12.8; f:1.12 mm; rNa max:0.5 mm; a max:2.06 mm; ra max:0.6 mm;

A2:33.3 mm; Weight:0.6 kg; T max.:100 °C; e:15 mm; L:86 mm; B:31 mm; S:12.7 mm; s1:15.5 mm; C0:6.65 kN; N:12mm;

d:15 mm; J:52 mm; G:M6x1; T min.:-20 °C; L1:22 mm; T max.:100 °C; s1:15.5 mm; A:40 mm; Designation of bearing:UC202G2; A1:22 mm;

b:190 mm; Material of Housing:grey cast; O-ring (optional):90x4; h1:121 mm; c:18 mm; N:15 mm; d1:50 mm; recommended torque:65 Nm; W1:214.5 mm; Cover bolts:M6x25;

Radial clearance class:CN; Maximum Capacity / Filling Slot:No; Enclosure:Open; Static load, C0:68 kN; D:150 mm; d:70 mm; Inner Race Width:0 Inch | 0 Millimete; Max operating temperature, Tmax:120 °C; Category:Single Row Ball Bear; Inch - Metric:Metric;